The builder’s clean is a potentially time-consuming task for a homeowner, but there are some basic steps that can make the process go much more smoothly.
Whether you’re trying to get out all of the dust from your builder’s clean or you’re looking to improve your building skills, there are some tips that will get you on the right track. Here’s what you need to know about the builder’s clean and how to do it effectively:
What’s involved in a builder’s clean?
Besides using specially-designed equipment, cleaning the outside of your new home will involve stripping the paint, washing down the walls, and removing the debris that’s built up over time.
You’ll also need to remove any furniture from the house and clean the floors, in the kitchen and bathrooms, you’ll want to wash down the counters and walls, as well as remove any gum or other residue that’s piled up over time.
When inside the home, you’ll want to strip the walls, wash the ceilings, and remove any wallpaper or other interior decor, you can also opt to power wash the home if you’re looking to remove more dirt, dust, and debris from the exterior.
Once the construction is clean, it’s time to start on the inside:
- Remove the built-up dust and debris from the walls, floors, and ceilings.
- To wash all of the walls, floors, and ceilings to remove any remaining debris.
- To use a dehumidifier to remove the moisture from the air and dry the walls and floors.
- To coat the walls and floors with a sealant to protect them from moisture, dust, and debris.
Tips for a builder’s clean
While Builders Clean Sydney is a very involved process, it doesn’t have to be a difficult one to get the job done properly, you just need to follow some basic steps that will help you get the best results.
Additionally, when you’re removing furniture and appliances from the house, you’ll need to make sure that you’re doing it correctly and safely With that in mind, here are some tips that will make your builder’s clean a little easier to handle:
- Use a mask during the clean:
When you’re stripping down walls, floors, and ceilings, you don’t want to breathe in any harmful dust or debris and wear gloves and goggles to prevent injury and make the process go much more smoothly.
- Wear coveralls when you’re stripping walls:
To prevent dirt and debris from getting into your clothes, you’ll want to wear protective coveralls when you’re stripping the walls.
- Use a wet/dry vac before you start:
A wet/dry vac uses suction to remove the dirt and debris, so it’s very effective at picking up particles that tend to be more stubborn than dust.
- Start the clean on the outside and work your way in:
When you’re stripping the walls and floors, you’ll want to start at the bottom and work your way up stripping the walls is slightly less messy as you’re only getting dust off of them, but it’s still a very messy process.
Additionally, when you’re washing the walls and ceilings, you’ll want to start on the outside and work your way in.
- Wash the walls first, then the ceilings and floors:
When you’re stripping the walls and ceilings, you’ll want to first wash them to remove any loose debris then, you can use a power washer and a hose to remove any stubborn dirt and debris.
